Ningbo Beilun Rhong Machinery Manufacturing Co., Ltd.
Model No.: RCM-A
Packaging: WOODEN CASE
Place of Origin: CHINA
Supply Ability: 10
HS Code: 8418699090
Port: FOB NINGBO
Scroll Type Air-cooled Industrial Chiller=== RCM-A series are capable of controlling precisely the mold temperature in plastic molding process as so to shorten molding cycle and speed product formalization. The principle of heat exchange is adopted for cooling. They can achieve rapid cooling, stable temperature controlling, and will be little effected by the surounding factors. Therefore they are necessary good equipments in modern industry.
1. Cooling temperature range 5-35 oC.
2. High-capacity tube-in-shell evaporater with very good heat exchange performance especially for high ambient temperature condition.
3. Tube-fin double condensers with excellent heat transfer and rapid cooling.
4. Stainless steel warm-keeping water tank.
5. R22 refrigerant to be used for efficient cooling.
6. R407 environment-friendly refrigerant is optional to use.
7. Overload protection for compressor, pump and blower.
8. Independent Temperature Controller, anti-freeze protection.
9. Phase sequence protection for control circuit, refrigeration loop controlled by high and low pressure switch.
10. Warm-keeping design for all piping to avoid partial convection.
11. Suitable for machine cooling in industries of plastics, electroplating, foodstuff, electronic products, bleaching and dyeing, ultrasonics.
|Compressor output power||HP||3||4||5||8||10||12.5||15||20||25||30|
|Pump Max flowrate||L/min||80||150||250||400|
|Pump Max pressure||kg/cm2||2.0|
|Pipe size outlet||lnch||1"*1||1Â½"||2"||2Â½"|
|Pipe size intlet||lnch||1"*1||1Â½"||2"||2Â½"|
|Extemal size mm|
Plesase excuse for not note if some specifications of products are changed
Note: 1) The cooling capacity is measured when the outgoing water temperature is 12oC and ambient temperature is 30oC.
2) The refrigerant can use R407.For coding,use "N".For example,RCM-10A-N.
3) The stardard voltage is 3¢,380V,50Hz. We also can make it as your requirments.
New updated design cool and heat exchange machines are suitable for plastic industry.Industril chillers can control
precisely the mold temperature in plastic molding process as so to shorten
molding cycle and speed product formalization. The principle of heat exchange
is adopted for cooling. They can achieve rapid cooling, stable temperature
controlling, and will be little effected by the surounding factors. Therefore
they are necessary good equipments in modern industry.